Product specifications are diverse and can ensure quality. It can be used for residential, highways, commercial districts, public places, etc. to protect personal safety and protect equipment and facilities. The choice of iron fence depends on the actual application environment. According to the appropriate specifications and styles of applications or customized, it is necessary to ensure that the guardrail can meet the protection requirements in terms of quality, height and structure. Secondly, it should be noted that the correct installation method is to protect and protect the prerequisite for fences. At the same time, normal installation also helps protect the guardrail itself to ensure its life.

The installation of the iron fence is a specific process: installation of embedded parts, labels, installation columns, and armrests to columns, polishing and polishing. The installation and embedded parts of the iron fence are used to add buried parts. Use the expansion bolt and steel plate to make a post -connector. The specific method is to place the lines on the soil building at the grassroots level to determine the position of the fixed point of the pillar, and then use it on the ground on the ground. Tap Drilling, and then install the expansion bolt. After the positioning bolt is positioned, tighten the bolt and weld between the nut and the screw to prevent the nut and steel plate from loosening. Later, the structure of buried parts is likely to cause errors. Therefore, the next step before the iron fence column is installed into a row to determine the accuracy of the position of the board and welding rod. Welding can be performed around. It is reminded that the welding of the iron fence should be performed through double. One holding a steel pipe is held vertically. It cannot shake during welding. The other party welded to ensure welding specifications.

Later, the armrest was connected to the column. Before the installation, put the iron pillar of the iron fence online online. According to the tilt angle of the venue and the roundness of the handrail used, the groove was performed at the upper end. Welded from one end to the other end. After connecting the adjacent steel pipe, weld the joints with an iron electrode, and should be cleaned before welding to ensure welding efficiency. After installing and welding the iron fence, it is necessary to polish and pollute. The main content that needs to be polished here is the welding location, because our products have been rusted and aesthetic treatment before leaving the factory. The weld was flattened by the sand wheel until the weld was not displayed.